What kind of material is better for door and window seal?
Release time:
2023-04-13
EPDM is the third monomer ethylene, propylene and a small amount of conjugated dienes copolymer, international named EthyienePropyeneDieneMethyiene EPDM for short.
Three different materials of seals, which is better?
EPDM is the third monomer ethylene, propylene and a small amount of conjugated dienes copolymer, international named EthyienePropyeneDieneMethyiene EPDM for short.
Ethylene propylene diene (EPDM) belongs to hard rubber, which is a kind of rubber with excellent properties. It is anti-aging, anti-corrosion, ozone resistance, will not shrink at low temperature, relatively stable, and can be used for more than ten years with the same quality.
Epdm sealing strip is formed by microwave vulcanization process once, the surface is smooth and beautiful, has good elasticity and compression deformation resistance, weather aging resistance, good stability, it is not easy to deform in a high temperature environment, and it is not easy to shrink in a low temperature environment, it can be said that it is not only heat resistant, but also cold resistant, it can be used in an environment of -50 ~ +135℃.
Epdm sealing strip
Silicone rubber refers to the main chain is alternately composed of silicon and oxygen atoms, silicon atoms are usually connected with two organic groups of rubber. Ordinary silicone rubber is mainly composed of silicone chains containing methyl groups and a small amount of vinyl. The introduction of phenyl group can improve the high and low temperature resistance of silicone rubber, and the introduction of trifluoropropyl and cyanide group can improve the temperature resistance and oil resistance of silicone rubber.
Silicone rubber has good low temperature resistance and can generally work at -55 ° C. After the introduction of phenyl, it can reach -73℃. The heat resistance of silicone rubber is also very prominent, can work for a long time at 180 ° C, slightly higher than 200 ° C can also withstand a few weeks or longer is still elastic, instantaneous resistance to high temperatures above 300 ° C.
The permeability of silicone rubber is good, and the oxygen permeability is the highest among the three synthetic polymers.
The primary raw material of silicone sealing strip is silicone rubber, so it has good insulation function, high and low temperature resistance, good resilience, and more importantly, there will be no smell.
Silicone rubber sealing strip is not only beautiful and generous color beautiful, soft feel, stretch very elastic, and has aging resistance, compression resistance, water penetration resistance and other characteristics. And it is also very well reflected in energy saving and environmental protection, sound insulation and noise reduction, anti-ultraviolet radiation and other aspects, which can effectively solve the problem of reduced sealing caused by sinking in the long-term use of wooden doors.
Some bad manufacturers will produce poor silicone sealing strips, reduce the amount of glue, the gloss of this strip is poor, and it will age in a few years.
Silicone seal strip
The main component of PVC sealing strip is polyvinyl chloride, and other components such as plasticizer are added to enhance its heat resistance, toughness, ductility, etc. PVC seals are easy to form, recyclable and reusable.
PVC seals, it can be said that it is not recommended among these three. Because it is easy to soften in the high temperature environment in summer, the oil on the surface of the seal is precipitated, contaminated with dust, and yellow (oil is easy to absorb soil). In the winter will be hard, easy to break, and its sealing is poor, but he still has a bit, that is cheap.
Nuoge Rubber Technology will appear at the West Africa Automotive Show 2024
2024-04-08
2023-04-13